Model: Genius Maxfire G-08
Operating System: Windows 7,Windows 7 x64 (Note: might work with other versions of this os.)
File: genius-g-08.zip
Comments:
-------------------------------------------------
The MaxFire Programmable G08 installation Guide
-------------------------------------------------
(1) The MaxFire Programmable G08 can support the standard Windows default
driver. Any user may use MaxFire Programmable G08 without the specific
driver.
(2) To support the additional functionlality regarding X-axis(Y-axis),
8-Buttons, or keyboard simulation, you are supposed to use the MaxFire
Programmable G08 setup diskette to complete installation.
If this is the first time you install the MaxFire Programmable G08
product, please take the following steps:
<1>.Plug the MaxFire Programmable G08 in the game port.
<2>.Running the MaxFire Programmable G08 setup diskette.
<3>.After system rebooting, you may need to calibrate the MaxFire
Programmable G08 from the <Game Controllers> in the Control Panel.
While adding the "Genius MaxFire Programmable G08" driver from the
Game Controllers list, DO NOT PRESS ANY BUTTON OF THE MAXFIRE
PROGRAMMABLE G08.
If there is the "OK" status displayed on the list, you are
able to do the calibration as usual.
<Note>: You have to follow the installation procedure above to prevent
your MaxFire Programmable G08 from the unexpected disaster.
If you fail to calibrate the MaxFire Programmable G08, please
remember to re-install the MaxFire Programmable G08 driver again.